How to Install a Tankless Water Heater {Complete Guide}

Do you know that tankless water heaters are 24 to 34 percent more energy efficient than regular units? This is according to a study done by  

Tankless water heaters offer longevity, less time to heat your water, less maintenance, easy installation, and enhanced safety.

If you want to reap the above benefits, read the following guide to learn about the installation process of a tankless water heater.

All you need to do is follow these steps to install a tankless water heater to provide your home with and endless supply of hot water:

  1. Decided on a type of tankless water heater
  2. Initial screening and permits
  3. Shut off gas, electrical, and water supply
  4. Drain and remove the old water heater
  5. Install a new water heater
  6. Install vent
  7. Connect water lines
  8. Final verification and testing

The good news is that the installation process of a tankless water heater is convenient if you follow the below-mentioned steps carefully.

Also, the manufacturers provide detailed instructions and other required installation parts to facilitate the installation process.

Types of Tankless Water Heaters

How to Install a Tankless Water Heater

You can find the following two tankless water heaters available on the market.

  • Electric tankless water heater - It’s an indoor water heater that doesn’t require an exterior vent. However, you need to plug the water heater into a 240-volt power supply.
  • Gas-powered tankless water heater - the gas-powered water heater requires a vent to the outside. Also, you need to connect it to a 120-volt outlet.

Initial Screening and Permits

Before installing the tankless water heater, you should understand local building codes.

Most municipalities and apartments have strict laws regarding the installation of gas or electric tankless water heaters.

Shut off Gas, Electric, and Water Supply

How to Install a Tankless Water Heater

To ensure your safety, you must shut off the circuit breaker before you start the installation process. Next, you should also turn off the gas supply to prevent leakage.

Finally, turn off the water supply if you don’t want to flood your home while replacing the existing water heater tank.

Drain and Remove Water Heater

How to Install a Tankless Water Heater

If you don’t have any existing tank-type water heater, you can skip this step and proceed further. For this purpose, you need the following prerequisites:

  • Container or bucket
  • Hose
  • Screwdriver

The first step is to close the water heater valve; however, if you can’t find it, you can simply turn off the main water supply. Now, open the hot water outlets throughout the home to remove the water from the tank.

You can also open the pressure valve to collect the water from the tank in a container using a hose.

It’s time to remove the connecting pipes, old wires, and other wall-mounting brackets using the screwdriver. However, be careful not to damage the existing wiring and pipes.

Once the water tank is empty, it’s time to remove the water heater after shutting off the gas line.

To minimize mess while removing the tank, you can place a bucket under the water connections to collect the water left in the pipes.

Install New Tankless Water Heater

Hassle-free installation is one of the most significant reasons behind investing in a tankless water heater. Similarly, you can find all the mounting hardware and wall brackets in the water heater box.

All you need to do is follow the instruction manual with the water heater.

You should drill holes in the wall to mount the water heater, keeping in view the following essential points:

  • Always mount the tankless water heater near a power outlet.
  • You should position the heater near water and gas lines.
  • It’s recommended to mount the water heater in an accessible area for future maintenance.

Install Vent

How to Install a Tankless Water Heater

Connecting a vent while installing the indoor gas tankless water heater is essential. For safety and reliability, you should install stainless steel vent pipes to remove excess heat from your home.

There are following two types of vents:

  • Direct-vent unit - You need to drill two holes, one for the exhaust vent and the other for the intake vent.
  • Power vent - Unlike the direct-vent unit, the power vent requires a single duct.

You can consult the tankless water heater instruction manual to distinguish between the above vents. Lastly, ensure their joint seals are tight between the duct, tube, wall, and the heater unit to prevent any leakage.

Connect Water Lines

It’s an important step where you must install the water lines to distribute hot water within the home.

The tankless water heaters come with two connections:

  • Inlet - This connection intakes cold water and passes it to the central heating unit.
  • Outlet - The hot water comes out of the outlet to be further distributed throughout the home.

We recommend using stainless steel pipes for water distribution because they can withstand higher temperatures. Alternatively, you can use PVC and copper piping fitting if you are on a budget.

Due to the complicated nature of this installation, it is best to seek the help of a professional if you don’t have a full understanding of electrical wiring, gas or plumbing code.  

Final Verification and Testing

If you have installed a gas tankless water heater, the last and most crucial step is to connect the gas pipe.

It’s a tricky process, so it’s best not to do the connections yourself; instead, you can hire a professional to make the secure gas connections.

Next, open the water valves and faucets in the home to check the water supply. However, you don’t need to turn on the electricity and gas supply at this stage.

If the water flows from all the faucets, congratulations, the water heater is installed correctly without disrupting the complete connection.

Now you can check for gas leaks before turning on the supply. Finally, connect the water heater to the power outlet to test the water pressure and temperature.

Always Go for Reliability

If you want to save storage space by installing a tankless water heater, it’s best to call the experts. Lucky for you, Dignity Plumbing offers reliable water heater services for instant water heater installation and other repair services in Las Vegas.

Dignity Plumbing guarantees long-term customer satisfaction by offering exceptional installation services. Also, they take pride in their team of highly-trained professionals having years of experience installing and repairing all types of water heaters.

You can rely on Dignity Plumbing for the following services:

  • Quality installation and repair
  • Guaranteed satisfaction
  • Long-term cleaning services
  • Exceptional customer services
  • Quick online booking

If you reside in Las Vegas and the surrounding areas, you can call Dignity plumbing or submit an online query to schedule an APPOINTMENT today.

What Your Neighbors are Saying in Las Vegas


Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat. Aenean faucibus nibh et justo cursus id rutrum lorem imperdiet. Nunc ut sem vitae risus tristique posuere.


No FAQ found.

Latest blogs

The Hidden Dangers of Galvanized Piping for Your Home's Water Quality

Are you a homeowner wondering if your piping is putting the water quality in your home at risk? Many of us don’t consider it, but the quality of our home’s water can have a tremendous impact on everything from our health and wellbeing to our overall comfort. If you have galvanized pipes, it’s essential to consider the hidden dangers that come with them.

Read More
right arrow

Can I Flush This? | What Can and Can't Go Down Your Pipes

Are you ever worried about what goes down your pipes? You’re not alone! Many homeowners, renters, and especially parents worry that they're going to make a mistake when flushing or washing something down the sink that can cause an issue. It's important to know what items are safe for your plumbing system and which ones aren't - after all, you don’t want to call in the professionals unless it's absolutely necessary. Are there any items widely believed to be ok for plumbing that may actually cause an issue? What things can go wrong in our efforts to keep pipes clean? Here at Dignity Plumbing, we'll help answer these questions! Read on as we provide insight into what can and cannot go down your drains safely so you don't end up having a major problem on your hands.

Read More
right arrow

Hydro-Jetting: The Most Effective Solution for Pipe and Drain Cleaning

Are you a homeowner in the Las Vegas area struggling with a clogged drain or slow-moving sewer line? The problem is likely caused by debris and residue that builds up over time. Unfortunately, traditional methods of drain cleaning can be labor-intensive and often don’t offer any long term solutions. That’s why Dignity Plumbing offers hydro-jetting services to clear out all the buildup in your pipes! Hydro-Jetting uses powerful streams of pressurized water to quickly remove blockages while being gentle on your pipes, resulting in efficient and reliable cleanings every time. Read on to learn more about hydro jetting — the most effective method for keeping your drains running smoothly!

Read More
right arrow